Print Friendly, PDF & Email

OPPalyte™ 36MO747

Product Description

White opaque biaxially oriented polypropylene film, coated on one side acrylic, one side PVdC. Provides excellent performances on all packaging machines.

Key Features

  • Substantial improvement in protection to the migration of mineral oils compared to standard uncoated  OPP and Blown PE films1
  • Significant mineral oils contamination protection period of more than 2 years2
  • Broad sealing range on acrylic side
  • Excellent aroma, oxygen, and moisture barriers
  • Superior opacity
  • High yield
  • Excellent stiffness
  • Coatings are mutually compatible and compatible with converter-applies PVdC coatings.
  • Excellent base for converty-applied coatings
  • Solvent-free coatings
  • Ideal support fo water-based ink printing on acrylic side

General

Availability

  • Africa & Middle East
  • Asia Pacific
  • Europe

Features

  • Acrylic Coated
  • Flavor & Aroma Barrier
  • In Lamination Lap Sealable
  • Gas Barrier
  • Moisture Barrier
  • Oxygen Barrier
  • PVdC Coated
  • Sealable PVdC Coated
  • Light Barrier

Applications

  • Biscuits/Cookie/Crackers
  • Box Overwrap
  • Confectionery, Gum
  • Confectionery, Sugar
  • Bakery
  • Fresh Produce
  • Confectionery, Chocolate
  • Frozen Food
  • Health and Beauty Care
  • Household and Detergents
  • Crisps and Snacks
  • Dry Foods and Beverage Powders
  • Ice Cream

Uses

  • Box Overwrap Flexible Packaging
  • HFFS Flexible Packaging
  • Pre-made Bags - Flexible Packaging
  • VFFS Flexible Packaging

Appearance

  • White

Processing Method

  • Cold Seal Adhesive
  • Inner Web Adhesive Lamination
  • Outer Web Adhesive Lamination
  • Solvent Flexographic Printing
  • Solvent Rotogravure Printing
  • Surface Print Unsupported
 

Properties

PropertyTypical ValueUnitTest Based On
Yield 40.4m²/kg Internal Method
Unit Weight 24.8g/m² Internal Method
Film Thickness 36µ Internal Method
Gloss(45°)
PVdC Surface 100 Internal Method
Light Transmission 22.0% Internal Method
Tensile Strength at Break
200 mm/min pull rate, 120 mm jaw separation
MD 115Mpa Internal Method
TD 170Mpa Internal Method
Dimensional Stability 135°C / 275°F, 7 min
MD -5.0% Internal Method
TD -6.0% Internal Method
Elongation at Break
200 mm/min pull rate, 120 mm jaw separation
MD 130% Internal Method
TD 50% Internal Method
Elastic Modulus
MD 1500Mpa Internal Method
TD 2500Mpa Internal Method
Seal Strength (ESM)
PVdC/PVdC
105°C, 0.034 Mpa, 2 sec 300g/2.5 cm Internal Method
Acrylic/Acrylic
95°C, 0.034 Mpa, 2 sec 300g/2.5 cm Internal Method
Heat Seal Range
Acrylic/Acrylic 55°C Internal Method
PVdC/PVdC 30°C Internal Method
Coefficient of Friction
Acrylic/Acrylic 0.25 Internal Method
PVdC/PVdC 0.35 Internal Method
Water Vapor Transmission Rate
38°C, 90% RH 4.8g/m²/24 hr Internal Method
23°C, 85% RH 1.1g/m²/24 hr Internal Method
Oxygen Transmission Rate
23°C, 0% RH 20cm³/m²/24 hr Internal Method
Oxygen Transmission Rate (Wet)
23°C, 75% RH 20.0cm³/m²/24 hr Internal Method

Legal Statement

Contact your Jindal Films Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB). This product is not intended for use in medical applications and should not be used in any such applications.

Processing Statement

  • Standard reel winding: Acrylic outside

Footnotes

  1. Product may not be available in one or more countries in the identfied Availability regions. Please contact your Sales Representative for complete country availability.
  2. Tested at 38°C (100°F)/100%RH, then calculated to 90%RH with .90 multiplier.
  3. Sample dimensions and conditioning vary due to differences in equipment design.
  4. 1 Please contact your sales representative to get quantitative data on film barrier properties to Mineral Oils (MOSH and MOAH)
  5. 2 Protection period by contaminant when measured under defined protocol – Please contact your sales representative to get more information on testing protocol

Revision date

  • September 20, 2018

Typical properties: these are not to be construed as specifications.

© 2018 Jindal Films. Jindal Films. Jindal Films, the Jindal Films’ logo, and other product or service names used herein are trademarks of Jindal Films, unless indicated otherwise. You may not upload, display, publish, license, post, point to, frame, transmit or distribute either this document or its information, whether in whole or in part, without Jindal Films’ prior written authorization. To the extent Jindal Films provides prior written authorization, the user may use the document or its information only if the document is unaltered and complete, including all of its headers, footers, disclaimers and other information. Any data included herein may be based upon: analyses of representative samples and not the actual product shipped, typical values, or otherwise. The information in this document relates only to the named product or materials when not in combination with any other product or materials. We base the information on data believed to be reliable, but we do not represent, warrant, or otherwise guarantee the accuracy, reliability, or completeness of this information; nor do we warrant, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent infringement, or suitability of the products, materials or processes described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage or injury directly or indirectly suffered or incurred as a result of, or related to, anyone using or relying on any of the information in this document. This document is not an endorsement of any non-Jindal Films’ product or process, and we expressly disclaim any contrary implication. The terms “we,” “our,” “Jindal Films” and “Jindal” are each used for convenience, and may include Films Americas LLC, Jindal Films Americas LLC, Films Europe S.ár.l., Jindal Films Virton SPRL, Jindal Films India Ltd., or any companies affiliated with them in the production and sale of film products. There are a number of such affiliated companies, some with names including “Jindal” or “Films” and some not. Neither these terms and conditions, nor anything else in this document, is intended to override or supersede the legal separateness of those affiliated companies and responsibility for local action and accountability remains with them.